earthSCAN

Metal Detecting

DeepTech Vista Smart +

DeepTech Vista Smart + Metal Detector


This is the slightly upgraded version of the original Vista Smart what is a firm favorite of many DeepTech fans.


With this + version you now get the option to either adjust the iron volume to a level that you desire or completely

silent the Iron (ferrous), so when detecting on busy ground and the iron is in abundance then you can lower

the iron volume so you can hear the good signals easier.


With the controls everything is within quick reach as with all Vista machines, it will only take you seconds

once in the field to setup and detect with.


On the faceplate we have the usual style layout what consists of sensitivity, ground balance and discrimination, but we also

have a pinpoint button that can be pressed to perfectly find out where the target is under the coil once located.


On the underneath of the control box we have two toggle switches, these are your boost feature

switch and your discrimination options,all metal, two tone.


All-Metal mode is great for archeological work when all metals are to be detected and recovered from the ground.


If you wish only to hear good targets (non ferrous) items only then you can do this just with a

flick of the toggle switch underneath the control box.


With the Vista Smart you'll be able to find small and large items with ease, it really has built up a great

reputation for its high performance what is always reassuring when when choosing a metal detector.


The sum up is - fast and deep with great all round performance that will benefit you in many field situations

Specifications


•    Operating Frequency - 15.5 kHz +/- 50 Hz
•    Detector type - motion
•    Sensitivity control - Yes
•    Volume control - Yes
•    Manual Ground Balance - Yes
•    Modes of operation - 3


•    DISC. Mode
•    2 Tone Mode
•    ALL METAL. Mode


•    Searchcoil Type - 2D
•    Searchcoil Size - 11"
•    Cable Length (approx.) - 51” ( 135 cm )
•    Audio Frequency (approx.) - 484/282 Hz
•    Weight (with batteries ) - (approx.)1320g.
•    Battery Requirements - We strongly recommend to use 8 x 1,5 V AA Alkaline Batteries
or rechargeable Batteries with more than 2000mA/h


•   Battery Life (typical) - 20-25 hours
•    LED Low Battery alert - Yes
•    Operation Temperature Range - 10-40 C
•    Optimum Humidity - 0 to 75% R.H.


DeepTech Vista Smart + Control Panel

DeepTech Vista Smart +

MANUAL

BROCHURE

REVIEWS

See your local DeepTech Dealer.......

0